Marksman 2-Channel Remote Start Keyless Entry System
M6A - Marksman 2 channel Remote Start Keyless Entry System from Magnadyne features gasoline engine or diesel engine operation (diesel engine mode has programmable 10, 20 or 30 second wait) and selectable 10,15, or 20 minute run times.
Technical Features
- Wiring Features:
- Parking light relay on-board
- Ignition No. 1 and No. 2 relay on-board
- Start relay on-board
- Heater / Air conditioner relay on-board
- Ignition No. 3 ground output
- (-) Door lock and unlock outputs
- 200ma multi-function output No. 1
- Horn Honk output
- Factory security Rearm output
- 200ma multi-function output No. 2
- Dome light control output
- Key sensor by-pass output
- 200ma multi-function output No. 3
- 2-step door unlock output
- Factory security disarm output
- 200ma Trunk release output
- Instant start or shutdown input
- Hood pin safety shutdown
- Brake switch safety shut down
- Neutral safety or remote toggle switch shut down
- Factory alarm disarm when channel No. 2 is activated
- Transmitter Operation Programmable Features:
- Chirp delete on/off
- Pathway illumination (parking lights on for 30 seconds after unlock or parking lights on for 10 seconds upon lock and 30 seconds upon un-lock)
- Constant or flashing parking lights when vehicle is running on remote start
- .8 sec/3.5 sec door lock/unlock output timing or double unlock pulse
- Ignition controlled door unlock/lock or lock only or unlock only or off
- Doors lock upon remote start or doors lock upon remote start shutdown or both or off
- 1 TX button press to remote start or 3 TX button presses to remote start
- Start every 3 hours for severe weather operation
- Temporary vehicle stopped remote start running feature
- Remote Starter Programmable Features:
- Gasoline engine or Diesel engine operation (diesel engine mode has programmable 10, 20 or 30 second wait)
- 10, 15 or 20 minute run times selectable
- Tach, voltage or timer remote start detection modes
